BFT-2021 is a commercial standing glute trainer. Special product for training the gluteus maximus. Classic Technogym shape design, the gantry is in the shape of an n, which highlights Technogym's independent personality, bold and not lacking in beauty.
♦ The main frame is made of SPHC high-quality steel and has a quality inspection report.
♦ The weights give resistance, users can adjust the appropriate load according to their own conditions.
High-quality stainless steel weight stack, with shock-absorbing plastic pads between each weight stack, can effectively reduce the noise of collisions.
Users can quickly adjust the weight by using the guide rod according to their own conditions.
There is a magnetic steel ring on the inside of the guide rod head to prevent vibration and fall, bringing an extraordinary safety experience.
2.5-3mm thick steel is used, and the solder joints at the joints are full and firm, with full strength.
After grinding, rust removal, polishing, and double-baking paint spraying, the equipment is not only novel, but also resistant to aging and oxidation.
With clear instructions, fitness sticker use illustrations to easy to explain the correct use of the muscles and training.
All the covers made from high quality soft rubber, durable, no deformation.
The seat cushion height adjuster uses an advanced atmospheric compression spring, allowing you to easily and quickly adjust the position.
The seat cushion is filled with high-density foam film, and the outside is covered with high-quality PU leather that is wear-resistant and does not fade.
Seat cushion color can be customized.
Using natural rubber or PU, plus iron core dip molding.
Wear-resistant and sweat-resistant, giving you a good fitness experience.
Equipped with high-quality engineering plastic pedals, soft texture, elastic, non-slip, anti-collision, and no rust.
It is effectively and completely isolated from the outside air, and water vapor cannot pass through, preventing sweat from permeating the equipment and rusting. High strength and easy to clean.
The pulley is made of nylon mixed with glass fiber, which has low friction coefficient, wear resistance and self-lubricating property.
Combined with steel kinematic bearings, force transmission is silky smooth!
Imported from Japan, the outer layer is made of high-grade wear-resistant and environmentally friendly PU leather, and the inner layer is 7 strands, a total of 105 316LHS stainless steel wires, with a maximum tensile force of more than 1500KG, super durable, safe and secure.
It is made of high-quality rubber, which is anti-sweat and anti-skid, comfortable and durable, and is equipped with a large spring.
The cylinder design is filled with high-density foam film, which conveniently hides the built-in spring latch, which can be adjusted to the appropriate position according to the length of your calf.
| Material Qualification |
Main tube: SPHC high-quality steel, thickness 2.5-3.0mm, with quality inspection report; Seamless tube: cold drawn steel Q235; Guide Rod: Hardened chrome plated rod and stainless steel. |
| Processing method | All pipes and plates are cut by automatic laser cutting; welding is done by automatic fixture welding machine to ensure accurate angle and beautiful connection. |
| Surface treatment process | Using physical high-pressure sandblasting process, environmental protection, degreasing and rust removal, and increasing surface adhesion. |
| Surface spray process | The car-type powder spraying and baking method is used, two electrostatic powder spraying, and two high temperature baking paint at 200 degrees Celsius. |
| Main tube | Olive nuclear tube 120*60*3.0mm, round tube 60*3.0mm |
| Gantry frame |
Rear cover: stamping and forming of 3mm steel plate; Front cover: ABS material; Head cover: PP material, consistent open mold forming |
| Hand Grips | Iron core with diameter of 32mm, outer layer of PU anti-slip gloves, both ends are equipped with aluminum alloy decorative covers |
| Load box | Completed by POM material CNC lathe, polished and formed, the wire groove is smooth and wear-resistant, and the maximum working load is 220 KG |
| Instruction icon |
Size: 650*280mm; Material: PVC; Product instruction icon, detailing product training parts, operating instructions and precautions |
| Load accessories |
Stainless steel guide rod: diameter 25*1.5mm; Pulley: Hardened integrated PP pulley or aluminum alloy; Steel wire rope: 7-core imported steel wire with an inner diameter of 5.8mm, the maximum use load is 220 KG |
| Counterweight device |
Guide Rod：With magnetic aluminum alloy head; Weight Stack：Cold drawn steel Q235 with cushion |
| Seat/Back Cushion | Three-layer material structure, bottom iron plate, open mold silicone pad, imitation ground PU/PVC leather |
| Training Cushions | Dip molding of natural rubber or CPU and iron core |
| Cushion adjustment | Double-sided 4-lever adjustment plate and two-way air lever device |
| Bearings | Luoyang LYC or imported high-speed bearings |
| Muscles Worked | The back of the leg |
| Major Muscle Training | Hamstrings | Gastrocnemius |
| Size (L x W x H) | 1285 x 1220 x 1850mm (50.59" x 48.03" x 72.83") |
| GW / NW | 231 / 221KG (509.26 / 487.22 lbs) |
| Weight Stack |
Standard weight: 70KG (154.32 lbs) Maximum weight: 100KG (220.46 lbs) |
